Function

„TERRATEST 3000“ service is very user-friendly, as already during the construction and development phase we focused on the fact that wrong tests would automatically be excluded thanks to an internal plausibility check. Because of this, it´s guaranteed that also inexperienced people can immediately use the device and carry out precise measurements right after a quick training given by our qualified technicians.

The test execution described below shows how simple and fast it is to take measurements that can be immediately printed through the integrated mini printer and saved on the chipcard (automatic safe in the internal memory) in order to take afterwords prints also from your PC.

The practical and back-lit graphic display guides you in a very easy and clear way through the different applications and allows you to work also in bad visibility conditions.

Make sure the plate perfectly adheres to the ground. If necessary use the plate or other auxiliary tools to flatten the ground.

Insert the cable and turn the electronic box on. Confirm the status query with the buttom „START“.

Follow the instruction: take first 3 preconsolidation tests and then 3 measurements.

Both the measuring and Evd data will be displayed. The tests are saved and can be printed later on.

At the start, „TERRATEST 3000“ checks the sensor connection, the battery charge, the chipcard and the GPS system and displays their status.

By pressing again „START“ you automatically enter into the measuring menu and you will be asked to take the 3 preconsolidation tests and then the 3 measurements

After each test, the display shows the displacement and the curves. After the third test it displays also the Evd value.

The control panel is well structured and easy to use. Thanks to the back-lit display it´s easy to follow the instruc­tions. After the test, it displays the 3 displacement curves with the Evd value.